inquiry
inquiry
RFID UHF tire inlayCharacter
1.Standard:ISO 18000-6C, EPC Class 1 Gen2.
2.Frequency:860 to 960MHz.
3.Flexible construction to withstand tire deformation for the lifetime of the tire
4.Possibility to read and write user data into tag's EPC or USER memory
5.Factory programmed tag identification number to prevent cloning
RFID UHF tire inlayApplication
Vehicle management , tire management
This UHF Gen 2 RFID tire tag is designed for embedding in the tire mould prior to the manufacture and curing of the tire. It survives the high temperatures encountered in the tire curing process and is robust enough to remain operational throughout the operating life of the tire. The EPC Class 1 Gen 2 RFID tag is attached by a permanent adhesive to the inside tire wall with a special formulated dual cure chemical or heat process. It can be built into truck tires that can be recapped several times.
1.Chip Type | AlienH3
|
2.Protocol | EPC Class1 Gen2/ISO 18000-6C |
3.Memory | AlienH3:EPC-96bit,UserMemory-512bit,TID-64bit, |
4.Environmental Specification | Shelf life:10years Recommended: -25c to +230c Storage Condition: 20% to 90%RH Operating Temp: -40c to +230c |
5.Read/Write Times | 100000times |
6.Reading Range | 0-5M(according to the design of the antenna or reader) |
7.Working mode | Passive |
8.size | 90*0.5mm |
| The Company | Shenzhen Koosound Technology Limited |
| The contact | May |
| The Address | Room605 Chuang Tou building,Feng Tian Road 148,Minsheng Community, Longgang Street,Longgang District Shenzhen City,China |
| The Website | https://www.alibobo.com/com/shenzh677/ |
Response Rate: High
Avg Response Time: 24–48 h
Business Type:
