Function:
Owe voltage protection: Input voltage in acuities, stop working 10.5 V in protecting state, indicator;
Over-voltage protection: Input voltage in 15 + 0.5 V, machine to stop working, and in state protection, indicator emit light
Overload protection: The output power rating, load beyond stop working, in keep state, indicator;
Short circuit protection: The output short-circuit, stop working load in protection condition, indicator;
Overheating protection: 75degree, temperature control points to stop working, when in protecting state, indicator emit light
Use environment: The altitude does not exceed 1000m, air temperature
- 10 ~ + 40degree. Keep shell without impurit, top 5CM in other end well ventilated
Output voltage: Output voltage fluctuation maximum deviation single-phase 220V + 10% range and frequency inverter frequency for 50Hz rated output
Protection Settings: Short circuit protection, over-current protection, overvoltage protection, owe voltage protection and phase lack protection, Lights warning, overload ability under specified conditions, in the short term, inverter exceed the ability of current output. Inverter overload ability should be stipulated in the load power factor, satisfy certain requirements. Display inverter should have AC output voltage, output current and output frequency characteristics of the data shows, and have input charged, electricity and fault status signal display.
Note:
(1)Such as inverter indicator shows red says because owe pressure/overload/thermal resulted inverter automatic protection shutoff, now please close vehicle power supply, cooling ten minutes later, restart
(2)Ensure that specified used appliances in power range can be used
(3)Ensure inverter, good ventilation car around in startup, inverter should be closed
(4)No longer use inverter, please disconnect and DC power of connection
(5)For power frequency and voltage or current sensitive precision instruments, don't recommend this inverter
(6)Long time when using, please note that don't use hand contact cooling vents
(7)Don't in damp environment, palm damp please use don't touch, in place where children can't touch
(8)Sure inverter few following the main technical parameters: Input DC voltage range, DC12V or 24V
AC220V or 110V rated output voltage
(9)High voltage lines there, everyday people do not apart!
