Aluminum (Al) metal evaporation material CAS 7429-90-5

High pure Aluminum, Al Evaporating coating material:

Purity: 99.99%, 99.999%

Size: 1-6mm , 3 x 3mm, 6 x 6mm, 6 x 3mm L, 2mm dia. x 12mm L or made per requested,

Shape: pieces, chunks, pellets, shots e.t.c

Atomic Weight: 26.9815386, Melting Point: 933.437 K (660.323°C or 1220.581°F), Boiling Point: 2792 K (2519°C or 4566°F), Density: 2.70g/cm3

Applications:
Aluminum is the most widely used non-ferrous metal
Aluminum is almost always alloyed, which markedly improves its mechanical properties, especially when tempered
Aluminum is usually alloyed – it is used as pure metal only when corrosion resistance and/or workability is more important than strength or hardness. A thin layer of aluminum can be deposited onto a flat surface by physical vapor deposition or (very infrequently) chemical vapor deposition or other chemical means to form optical coatings and mirrors.
Super purity aluminum (SPA, 99.980% to 99.999% Al), used in electronics and CDs.

Aluminum is a silvery white, soft, ductile metal, Aluminum is remarkable for the metal's low density and for its ability to resist corrosion due to the phenomenon of passivation. Structural components made from aluminum and its alloys are vital to the aerospace industry and are important in other areas of transportation and structural materials. The most useful compounds of aluminum, at least on a weight basis, are the oxides and sulfates.
Aluminum is a relatively soft, durable, lightweight, ductile and malleable metal with appearance ranging from silvery to dull gray, depending on the surface roughness
Corrosion resistance can be excellent due to a thin surface layer of aluminum oxide that forms when the metal is exposed to air, effectively preventing further oxidation. The strongest aluminum alloys are less corrosion resistant due to galvanic reactions with alloyed copper. This corrosion resistance is also often greatly reduced by aqueous salts, particularly in the presence of dissimilar metals.

we also can supply below high purity metal sputtering targets material: