M2M Easy 2 Security Communicator

Alarm signal transmission through GSM/GPRS network

 

Multifunctional device for transmitting the Contact ID signals of alarm systems through GSM/GPRS network toward dispatching or alarm centers.

The device is able to signaling remotely to any IP receiver or for the alarm centre.

It is also able to sense the received alarm events on input lines independently from an external alarm system, when the Customer is notified.

The relay output can control a connected device remotely – without any cost.

 

Communication
• Analog voice-call based alarm signaling through GSM to the alarm centre or by phone line
• GPRS data transmitting (to IP receiver or IP address (primary & secondary))
• Sending life signals through GSM/GPRS
• Generating alarms for signal changes of input lines
• SMS alarm notification (up to 4 phone numbers)
• Remote control by SMS message/phone ringing
• Various protocols, Contact ID international format, compatibility with several alarm systems

Connection
• 2pcs inputs (voltage/contact): sensing input status changes, generate alarms
• 1pcs output (remote control/switching)
• Alarm Tip-Ring input (for an alarm system)
• Serial connection (configuring parameters)

Safety
• Reliable operation, automatic network recovery
• Easy installation, parametrizing software
• Remote/local configuration/firmware updates
• LED display (status/failure/signal strength)

 

Application

Transmission to dispatcher centreTransmitter for alarm systemsStandalone alarm signalingSafety tasksRemote control (gate opening, boiler control, switching)Remote monitoring of input lines